Explain the Easy Steps to troubleshoot Canon MX922 Print Head Errors
Canon MX922 is one of the All in one printer that has produced high performance in the functioning of printing today. Due to its advanced inbuilt features present this printer prints, scan, and copy the document at the same time. But still, it is a machine so you can easily encounter some errors while using it. Recently Print head errors have become one of the most troubling errors that can cause hindrance in the functioning of printers. This error is also popped up to the screen showing an error message 1403. In other words, we can say that this error is also known as 1403 Error and always pops up when you’re trying to print a document. To tackle this error follow the Canon MX922 Troubleshooting steps that have been discussed below. But First Let sees why this type of error occurs inside the Canon MX922 Printer while printing.
Causes of Canon MX922 Print head Issue:
- The
print head has not been installed properly
- Internal
problems inside the printer can also cause the Print head error
- Ink
Cartridges stopped working Suddenly
- Use
of incompatible Print head can also be the reason for Error
Easy Troubleshooting Steps to fix Canon MX922 Print Head Errors:
Two types of Solutions has been discussed below that will remove this error permanently
Solution 1: Troubleshoot Ink Cartridge Problem
- Turn
off the Printer and move the lid of your printer to open it.
- Now
Hold the Carriage inside the printer and slide it to the other side
- Initiate
the Cleaning process by removing the print heads along with ink tanks
inside the printer
- Use
the cotton bud that should be dip inside the mixture of any cleansing
agent to clean the print head as well as ink cartridges
- The
cleaning process should be continued until inks get stopped dripping from
the cartridge
- Dry
the Cartridges and placed them back carefully to their position
- Turn
on the printer again by connecting the power chord of the printer to the
power source
- Test
a print page and check whether the print head issue has been resolved or
not.
Solution 2: Troubleshoot internal Problems of Printer
In any print head issue still has not been resolved yet then there might be an internal problem inside your printer. Follow the steps to troubleshoot this issue:
- Turn
on the printer
- Change
the position of the print head by pulling out the tray and lift the
scanning unit.
- Now
Lift the inner cover and remove the ink bottles from it
- By
Lifting the lever of the print head lock move your print head in the
holder position of canon software
- Insert
the ink bottles back to its original place and closed the scanning
cover
- Test
a print page again to check whether the issue has been resolved.
Follow these solutions and get rid of the print head error easily. But if in any case, Canon MX922 Troubleshooting steps do not help you to resolve the issue then get in touch with the technical expertise.
Comments
Post a Comment